Home » , , » Stereo preamplifier with tone controls

Stereo preamplifier with tone controls

It is a pre amplifier and audio control unit which will be a useful complement to our circuit amplifier makes. It is extremely easy to build special Philips TDA1524A due to the use of an IC.

Because it uses the control voltage, linear single gang can use pots which lowers costs and reduces Fehler.Es monitoring of switches control or microprocessor, if desired.

Specification:

DC input: 15V DC Versorgung or 12V
DC battery.50 mA min
Maximum output power: 3 V RMS
Maximum input power: 300 mV, G = 20 dB 3V RMS, G = 0 DB
Entry Z 10 k ohms
Z 300 OHM output frequency or: 50 kHz + /-1 dB
THD 1 kHz: 0.1% to 1 v output signal noise ratio: 80 dB, G = 0 dB
Bass boost/cut ~ 15 dB at 50 Hz
Triple inch cut blow ~ 15 dB at 15 kHz



Click here for Datasheet TDA1524A IC - original Audio Kit


0 comments:

Post a Comment

 
Created By SoraTemplates | Distributed By Gooyaabi Themes