POWER AMPLIFIER BLAZER 800W (X8)
Electronics Circuits - Blazer Power Amplifier using Transistors 8 (4 sets) on the Sanken final will guarantee that the energy generated is enormous.
You can connect the output to the speakers as large as 18 "or 21" which in parallel as much as 2 pieces (4 ohm impedance).
His bass voice boomed though will be outdoors.
This power amplifier is very appropriate for those of you who really want to improve the sound quality of the sound system rentals.
Blazer in the design for the use of a sound system in a field that requires the beat at low frequencies.
With these Power Blazer, low tone (bass) that are produced will be deeper and kicking.
But must be supported by an appropriate speaker and the right speaker Box in the application.
For the use of the scale House (Home Audio) we do not recommend this Power Amplifier.
But to generate tone Mid or Mid High, little Blazer have a weakness at this point.
The Mid tone is generated less subtle or less detail.
So to your sound system, we recommend using the Power Blazer is only for Low-end Amplifier only.
There is one more thing you need to consider before you assemble the Blazer that the Power Amplifier is in dire need of a large flow of suply.
For the module X-8 Mono only, you need at least 20 Ampere Current Suply/45VAC.
To get more power, the AC voltage should be higher than that which is around 55-60 VAC.
SPECIFICATIONS
0 comments:
Post a Comment